- Rane, S., Kovačević, A., Stošić, N. and Smith, I. (2021).
**Analysis of real gas equation of state for CFD modelling of twin screw expanders with R245fa, R290, R1336mzz(Z) and R1233zd(E).***International Journal of Refrigeration*,*121*, pp. 313–326. doi:10.1016/j.ijrefrig.2020.10.022. - Read, M.G., Smith, I.K. and Stosic, N. (2020).
**Influence of rotor geometry on tip leakage and port flow areas in gerotor-type twin screw compressors.***Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering*pp. 95440892096241–95440892096241. doi:10.1177/0954408920962412. - Read, M.G., Stosic, N. and Smith, I.K. (2020).
**The Influence of Rotor Geometry on Power Transfer Between Rotors in Gerotor-Type Screw Compressors.***Journal of Mechanical Design*,*142*(7). doi:10.1115/1.4045508. - Nouri, J.M., Guerrato, D. and Stosic, N. (2020).
**Turbulent Flow Measurements near the Discharge Port of a Screw Compressor.***Flow, Turbulence and Combustion*,*104*(4), pp. 927–946. doi:10.1007/s10494-019-00080-6. - Rane, S., Kovačević, A. and Stošić, N. (2019).
**Grid Generation for CFD Analysis and Design of a Variety of Twin Screw Machines.***Designs*,*3*(2), pp. 30–30. doi:10.3390/designs3020030. - Read, M.G., Smith, I.K. and Stosic, N. (2017).
**Internally geared screw machines with ported end plates.***IOP Conference Series: Materials Science and Engineering*,*232*, pp. 12058–12058. doi:10.1088/1757-899x/232/1/012058. - Buckney, D., Kovacevic, A. and Stosic, N. (2017).
**Design and evaluation of rotor clearances for oil-injected screw compressors.***Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering*,*231*(1), pp. 26–37. doi:10.1177/0954408916660342. - Kovacevic, A., Stosic, N. and Smith, I.K. (2017).
**Editorial.***Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering*,*231*(1), pp. 3–3. doi:10.1177/0954408916685022. - Read, M.G., Smith, I.K. and Stosic, N. (2017).
**Optimisation of power generation cycles using saturated liquid expansion to maximise heat recovery.***231*(1), pp. 57–69. doi:10.1177/0954408916679202. - Read, M., Smith, I., Stosic, N. and Kovacevic, A. (2016).
**Comparison of Organic Rankine Cycle Systems under Varying Conditions Using Turbine and Twin-Screw Expanders.***Energies*,*9*(8), pp. 614–614. doi:10.3390/en9080614. - Rane, S., Kovačević, A. and Stošić, N. (2015).
**Analytical Grid Generation for accurate representation of clearances in CFD for Screw Machines.***IOP Conference Series: Materials Science and Engineering*,*90*, pp. 12008–12008. doi:10.1088/1757-899x/90/1/012008. - Buckney, D., Kovacevic, A. and Stosic, N. (2015).
**Rotor clearance design and evaluation for an oil injected twin screw compressor.***IOP Conference Series: Materials Science and Engineering*,*90*, pp. 12003–12003. doi:10.1088/1757-899x/90/1/012003. - Arjeneh, M., Kovacevic, A., Rane, S., Manolis, M. and Stosic, N. (2015).
**Numerical and Experimental Investigation of Pressure Losses at Suction of a Twin Screw Compressor.***IOP Conference Series: Materials Science and Engineering*,*90*, pp. 12006–12006. doi:10.1088/1757-899x/90/1/012006. - Read, M.G., Smith, I.K. and Stosic, N. (2015).
**Optimisation of two-stage screw expanders for waste heat recovery applications.***IOP Conference Series: Materials Science and Engineering*,*90*, pp. 12058–12058. doi:10.1088/1757-899x/90/1/012058. - Smith, I.K. and Stosic, N. (2015).
**Compressors and their Systems.***229*(2), pp. 87–87. doi:10.1177/0954408915585044. - Stosic, N. (2015).
**On heat transfer in screw compressors.***International Journal of Heat and Fluid Flow*,*51*, pp. 285–297. doi:10.1016/j.ijheatfluidflow.2014.10.026. - Stosic, N. (2015).
**On heat transfer in screw compressors.***International Journal of Heat and Fluid Flow*,*51*, pp. 285–297. doi:10.1016/j.ijheatfluidflow.2014.10.026. - Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2014).
**Deforming grid generation and CFD analysis of variable geometry screw compressors.***Computers & Fluids*,*99*, pp. 124–141. doi:10.1016/j.compfluid.2014.04.024. - Read, M., Smith, I. and Stosic, N. (2014).
**Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems.***Transactions - Geothermal Resources Council*,*38*, pp. 705–712. - Chukanova, E., Stosic, N. and Kovacevic, A. (2013).
**Experimental Investigation and Numerical Modelling of Dynamic Behaviour of Screw Compressor Plant.***Universal Journal of Engineering Science*,*1*(3), pp. 68–79. doi:10.13189/ujes.2013.010302. - Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013).
**Grid deformation strategies for CFD analysis of screw compressors.***International Journal of Refrigeration*. - Stosic, N., Smith, I.K. and Kovacevic, A. (2012).
**Numerical and experimental research in heat transfer to screw compressor rotors.***Frontiers in Heat and Mass Transfer*,*3*(2). doi:10.5098/hmt.v3.2.3003. - Ous, T., Mujic, E. and Stosic, N. (2012).
**Experimental investigation on water injected twin screw compressor for fuel cell humidification.***Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science*. - Smith, I.K. and Stosic, N. (2011).
**SPECIAL ISSUE ON COMPRESSORS AND THEIR SYSTEMS.***PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING*,*225*(E2), pp. 81–81. doi:10.1177/0954408911408004. - Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2011).
**Geometry of screw compressor rotors and their tools.***Journal of Zhejiang University: Science A*,*12*(4), pp. 310–326. doi:10.1631/jzus.A1000393. - Smith, I.K., Stosic, N., Mujic, E. and Kovacevic, A. (2011).
**Steam as the working fluid for power recovery from exhaust gases by means of screw expanders.***225*(2), pp. 117–125. doi:10.1177/2041300910393429. - Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2011).
**Noise generation and suppression in twin-screw compressors.***225*(2), pp. 127–148. doi:10.1177/1464419311403875. - Stosic, N., Smith, I., Kovacevic, A. and Mujic, E. (2011).
**Review of Mathematical Models in Performance Calculation of Screw Compressors.***International Journal of Fluid Machinery and Systems*,*4*(2). - Kovacevic, A., Mujic, E., Stosic, N. and Smith, I. (2010).
**Extending the Role of Computational Fluid Dynamics in Screw Machines.***Proc. IMechE, Part E: J. Process Mechanical Engineering*,*225*, pp. 1–15. - Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2009).
**Influencia de la forma del puerto de descarga en las prestaciones del compresor de tornillo y en las pulsaciones del gas.***Frío-calor y aire acondicionado*,*417*, pp. 14–23. - Guerrato, D., Nouri, J.M., Stosic, N., Arcoumanis, C. and Smith, I.K. (2008).
**Flow measurements in the discharge port of a screw compressor.***Journal of Process Mechanical Engineering, Part E*,*222*(E4), pp. 211–223. - Smith, I.K. and Stosic, N. (2008).
**Guest Editorial.***222*(4), pp. i–i. doi:10.1177/095440890822200401. - Nouri, J.M., Guerrato, D., Stosic, N. and Arcoumanis, C. (2008).
**Axial flow characteristics within a screw compressor.***HVAC and R Research*,*14*(2), pp. 259–274. doi:10.1080/10789669.2008.10391007. - Nouri, J., Stosic, N., Arcoumanis, C. and Guerrato, D. (2008).
**Axial Flow Characteristics within a Screw Compressor.***HVAC&R Research*,*14*(2), pp. 259–274. doi:10.1080/10789669.2008.10391007. - Smith, I.K., Stosic, N., Kovacevic, A. and Langson, R. (2007).
**Cost effective small scale ORC systems for power recovery from low enthalpy geothermal resources.***Transactions - Geothermal Resources Council*,*31*, pp. 529–534. - Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2007).
**CFD INTEGRATED DESIGN OF SCREW COMPRESSORS.***ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS*,*1*(2), pp. 96–108. doi:10.1080/19942060.2007.11015185. - Stosic, N. (2006).
**A geometric approach to calculating tool wear in screw rotor machining.***International Journal of Machine Tools and Manufacture*,*46*(15), pp. 1961–1965. doi:10.1016/j.ijmachtools.2006.01.012. - Stosic, N. (2006).
**Evaluating errors in screw rotor machining by tool to rotor transformation.***Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture*,*220*(10), pp. 1589–1596. doi:10.1243/09544054JEM552. - Leibowitz, H., Smith, I.K. and Stosic, N. (2006).
**Cost effective small scale ORC systems for power recovery from low grade heat sources.***American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES*. - Stosic, N. (2006).
**Increasing the Reliability of Screw Compressors in the Gas and Process Industries.***Oil & Gas Processing Review*. - Broglia, T., Iobbi, M. and Stosic, N. (2006).
**Improving the capacity and performance of air-conditioning screw compressors.***American Society of Mechanical Engineers, Advanced Energy Systems Division (Publication) AES*. doi:10.1115/IMECE2006-13121. - Smith, I.K., Stosic, N. and Kovacevic, A. (2005).
**Screw expanders increase output and decrease the cost of geothermal binary power plant systems.***Transactions - Geothermal Resources Council*,*29*, pp. 787–794. - Stosic, N., Smith, I.K. and Kovačević, A. (2004).
**Multifunctional Screw Machines.***Mašinstvo Journal, Zenica*,*8*(1), pp. 3–16. - Stošić, N. (2004).
**Review article: Screw compressors in refrigeration and air conditioning.***HVAC and R Research*,*10*(3), pp. 233–263. doi:10.1080/10789669.2004.10391102. - Kovacevic, A., Stosic, N. and Smith, I.K. (2004).
**A numerical study of fluid-solid interaction in screw compressors.***International Journal on Computer Application in Technology*,*21*(4), pp. 148–158. - Stosic, N., Smith, I.K. and Kovacevic, A. (2003).
**Opportunities for innovation with screw compressors.***217*(3), pp. 157–170. doi:10.1243/095440803322328836. - Stosic, N., Smith, I.K. and Kovacevic, A. (2003).
**Optimisation of screw compressors.***Applied Thermal Engineering*,*23*(10), pp. 1177–1195. doi:10.1016/S1359-4311(03)00059-0. - Stosic, N., Smith, I.K. and Kovacevic, A. (2003).
**Rotor interference as a criterion for screw compressor design.***Journal of Engineering Design*,*14*(2), pp. 209–220. doi:10.1080/0954482031000091518. - Stosic, N., Smith, I.K. and Kovačević, A. (2003).
**The Design of Efficient Air Screw Compressors.***Mašinstvo Journal, Zenica*,*7653*(1), pp. 12–26. - Stosic, N., Kovačević, A. and Smith, I.K. (2003).
**CFD Analysis of a Screw Compressor Performance.**. - Stosic, N., Madhav, K.V., Smith, I.K. and Kovačević, A. (2003).
**Proektirovanie semeistva maslozapolneniih vintoviih kompressorov.***Compressors and Pneumatics*,*1*, pp. 2–5. - Stosic, N., Mc Creith, I., Smith, I.K. and Kovačević, A. (2003).
**Proektirovanie effektivniih vintoviih kompressorov dlia podachi suhogo vazduha.***Compressors and Pneumatics*,*1*, pp. 2–5. - Stosic, N., Kovačević, A. and Smith, I.K. (2003).
**Three Dimensional Numerical Analysis of Screw Compressor Performance.***) Journal of Computer Methods in Applied Mechanics and Engineering*,*3*(2), pp. 259–284. - Stosic, N., Smith, I.K. and Kovacevic, A. (2002).
**Screw compressor: A strong link in the development chain.***Tehnicki Vjesnik*,*9*(3-4), pp. 39–44. - Smith, I.K., Stošić, N. and Kovačević, A. (2001).
**Twin screw machines to replace throttle valves in refrigeration systems.***Strojniski Vestnik/Journal of Mechanical Engineering*,*47*(8), pp. 484–490. - Stosic, N., Kovačević, A. and Smith, I.K. (2000).
**Design of Oil-Less Helical Twin Screw Machines.***Mašinstvo Journal, Zenica*,*3*(4), pp. 171–180. - Stosic, N. (1999).
**Recent Developments in Screw Compressors.***Mašinstvo Journal, Zenica*,*2*(3), pp. 63–78. - Stosic, N. (1998).
**On gearing of helical screw compressor rotors.***Proc Instn Mech Engrs, Part C, Int. J. Mech Eng. Sci*,*212*(7), pp. 389–399. - Stosic, N., Kovačević, A., Aldis, C.A. and Smith, I.K. (1997).
**An Application of 'N' Rotors in an Oil Flooded Screw Compressor.***'Mašinstvo' Journal of Mechanical Engineering, Zenica*,*1*(1), pp. 3–11. - Stosic, N., Smith, I.K., Kovačević, A. and Aldis, C.A. (1997).
**The Design of a Twin-screw Compressor Based on a New Rotor Profile.***Mašinstvo Journal, Zenica*,*1*(1), pp. 1–9. - Stošic, N. and Hanjalić, K. (1997).
**Development and optimization of screw machines with a simulation model-part I: Profile generation.***Journal of Fluids Engineering, Transactions of the ASME*,*119*(3), pp. 659–663. doi:10.1115/1.2819295. - Hanjalić, K. and Stošic, N. (1997).
**Development and optimization of screw machines with a simulation model-part II: Thermodynamic performance simulation and design optimization.***Journal of Fluids Engineering, Transactions of the ASME*,*119*(3), pp. 664–670. doi:10.1115/1.2819296. - Stošić, N., Smith, I.K., Kovačević, A. and Aldis, C.A. (1997).
**The design of a twin-screw compressor based on a new rotor profile.***Journal of Engineering Design*,*8*(4), pp. 389–399. doi:10.1080/09544829708907973. - Smith, I.K., Stošić, N. and Aldis, C.A. (1996).
**Development of the trilateral flash cycle system. Part 3: The design of high-efficiency two-phase screw expanders.***Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy*,*210*(1), pp. 75–92. doi:10.1243/pime_proc_1996_210_010_02. - Stosic, N. and Hanjalić, K. (1993).
**Multi Purpose Simulation of Processes in Positive Displacement Compressors.**. - Stošic, N., Milutinović, L., Hanjalić, K. and Kovačević, A. (1992).
**Investigation of the influence of oil injection upon the screw compressor working process.***International Journal of Refrigeration*,*15*(4), pp. 206–220. doi:10.1016/0140-7007(92)90051-U. - Stosic, N., Demirdžić, I., Kaludjerčić, P. and Hadžić, I. (1992).
**Die Loesung des Instabilitaetproblems bei numerischen Berechnungen von Gasnetzen.***WF Gas-Erdgas*,*133*(4), pp. 209–216. - Stosic, N. and Hanjalic, K. (1991).
**Development and optimization of a new family of screw-compressors by computer modeling.**. - STOSIC, N., HANJALIC, K., KOVACEVIC, A., KOPRIVICA, J. and MARIJANOVIC, Z. (1990).
**MATHEMATICAL-MODELING AND EXPERIMENTAL INVESTIGATION OF REFRIGERATION SCREW COMPRESSOR WORKING PROCESS.***STROJARSTVO*,*32*(1), pp. 17–25. - Stosic, N., Hanjalić, K., Kovačević A, , Milutinović, L.J., Koprivica, J. and Lovren, N. (1990).
**Experimental Investigation of the Influence of Oil Injection on Screw Compressor Working Processes.***Energoinvest Journal for Science, Engineering and Technology*,*21*, pp. 73–80. - Stosic, N., Hanjalić, K., Kovačević, A., Milutinović, L.J., Koprivica, J. and Lovren, N. (1989).
**Mathematical Modelling of the Screw Compressor Working Processes.***Energoinvest Journal for Science, Engineering and Technology*,*20*, pp. 7–13. - Stosic, N., Hanjalić, K., Kovačević, A., Milutinović, L.J., Koprivica, J. and Lovren, N. (1989).
**Experimental Investigation of Screw Compressor Working Process.***Energoinvest Journal for Science, Engineering and Technology*,*20*, pp. 15–21. - Stosic, N., Hanjalić, K., Kovačević, A., Milutinović, L.J., Koprivica, J. and Lovren, N. (1989).
**Computer Aided Design of Screw Compressors.***Energoinvest Journal for Science, Engineering and Technology*,*20*, pp. 23–30. - Stosic, N., Hanjalić, K., Kovačević, A., Milutinović, L.J., Koprivica, J. and Lovren, N. (1989).
**Mathematical Modelling of Oil Influence upon the Screw Compressor Working Cycle.***Energoinvest Journal for Science, Engineering and Technology*,*20*, pp. 73–79. - Stosic, N., Pržulj, V. and Vasić, S. (1989).
**The Development and Application of a Mathematical Model of the Drying Process of an Electrode Fibre.***Srojarstvo Journal*,*31*, p. 284. - Stosic, N. (1989).
**A Compressor of Advanced Technology.***Ponalazač Journal, Sarajevo*,*2*, p. 53. - Stosic, N. and Marijanović, Z. (1988).
**An Investigation of the Assumption of Real Gas Properties in the Mathematical Modelling of Screw Compressor Working Processes.***KGH Journal, Belgrade*,*4*, p. 185. - STOSIC, N., HANJALIC, K., KOPRIVICA, J., LOVREN, N. and IVANOVIC, M. (1986).
**COMPUTER-AIDED-DESIGN OF SCREW COMPRESSORS.***Strojarstvo Journal*,*28*(3), pp. 125–132. - STOSIC, N., HANJALIC, K. and KOPRIVICA, J. (1986).
**A CONTRIBUTION TO THE MATHEMATICAL-MODELING OF THE SCREW COMPRESSOR OPERATING PROCESS.***STROJARSTVO*,*28*(2), pp. 95–100. - Hanjalic, K. and Stosic, N. (1985).
**HYSTERESIS OF TURBULENT STRESSES IN WALL FLOWS SUBJECTED TO PERIODIC DISTURBANCES.**pp. 287–300. - Stosic, N., Demirdžić, I. and Kaludjerčić, P. (1985).
**Die Erweiterung der Anwendung der Hardy-Cross Methode.***GWF Gas/Erdgas*,*126*(9), pp. 515–518. - Stosic, N., Hanjalić, K. and Vučetić, D. (1984).
**Modelling of Positive Displacement Compressor Processes.***Termotehnika Journal, Belgrade*, (1-2), pp. 45–56. - Stosic, N. and Hanjalić, K. (1984).
**Turbulent Flows in Divergent Channels.***Journal of Academy of Science of Bosnia and Herzegovina, Sarajevo: Mathematical Models of Turbulent Transport Processes. LXVI*pp. 103–116. - Stosic, N. and Hanjalić, K. (1984).
**The Effects of Compressibility and Unsteadiness in Turbulent Internal Flows and Their Implication for Numerical Solutions.***Journal of Academy of Science of Bosnia and Herzegovina, Sarajevo: Mathematical Models of Turbulent Transport Processes. vLXVI*pp. 139–160. - Stosic, N. and Maričić, D.J. (1983).
**The Programming of Steam Boiler Calculations and Its Application to Investigations of Fouling.***Tehnika Journal, Belgrade*,*32*(12), pp. 1761–1765. - VUCETIC, D., STOSIC, N. and HANJALIC, K. (1982).
**THE CONCENTRATED PARAMETER MODELING OF THE MULTICYLINDER TURBOCHARGED DIESEL-ENGINE THERMODYNAMICS AND GASDYNAMICS PROCESSES.***STROJARSTVO*,*24*(6), pp. 321–326. - Stosic, N., Vučetić, D. and Hanjalić, K. (1982).
**Application of the Concentrated Parameter Approach to Modelling Gas-Dynamic: Processes in Multicylinder Supercharged Engines.***Strojarstvo Journal*,*24*(6), pp. 37–326. - Stosic, N., Hanjalić, K. and Arslanagić, M. (1980).
**A Contribution Towards a Methodology of Complex Investigations of Positive Displacement Compressors.***Tehnika Journal,Belgrade*,*10*, pp. 1451–1459. - Hanjalic, K. and Stosic, N. (1978).
**SOME ASPECTS OF LABORATORY TESTING AND COMPUTER MODELLING OF TWO-STAGE COMPRESSORS WITH INTER AND AFTER-COOLING.***Proceedings of the IMechE Conference on Design and Operarion of Industrial Compressors*pp. 11–19. - Hanjalic, K. and Stosic, N. (1978).
**Some aspects of laboratory testing of two-stage reciprocating compressors.**. - STOSIC, N. and HANJALIC, K. (1977).
**A CONTRIBUTION TOWARDS MODELING OF 2-STAGE RECIPROCATING-COMPRESSORS.***INT J MECH SCI*,*19*(8), pp. 439–445. - Stosic, N. and Hanjalić, K. (1977).
**Mathematical Modelling of Gasdynamic Processes in Positive Displacement Compressors.***Tehnika Journal*,*5 AND 6*.

## Contact details

## Address

City, University of London

Northampton Square

London EC1V 0HB

United Kingdom

## About

### Overview

Professor Stosic graduated in mechanical engineering at the University of Sarajevo. He then obtained an MSc at the University of Zagreb followed by a doctorate at the University of Sarajevo where he continued as a member of staff. There, as a result of successive promotions, he became both professor of Applied Thermodynamics and Deputy Head of the Department of Mechanical Engineering. In parallel with this appointment, he held the post of Head of the Thermo engineering Department at the Institute of Process, Power and Environmental Engineering in Sarajevo.

As a result of the war in former Yugoslavia, he took up a research appointment at City University in 1992 to investigate the performance of two-phase expanders. This work led to his appointment as Royal Academy of Engineering Professor of Positive Displacement Compressor Technology at City University in 1995 where he established the Centre for Positive Displacement Compressor Technology.

Professor Stosic has carried out research work on a range of applications of heat and fluid flow including boilers, furnaces and compressors. Arising from this work, he is the author and co-author of over 90 refereed publications and more than 100 major industrial reports, a textbook on computers in engineering which ran to 3 impressions in 4 years, and a major text on boilers and furnaces with 2 editions in 5 years. In 1998 he was awarded the ImechE Bernard Hall Prize.

### Award

- Geothermal Resources Council, California, USA (2004)
**2004 Geothermal Resources Council Best paper**

Geothermal Resources Council Best paper, California, USA, for paper "An Improved System for Power Recovery from Higher Enthalpy Liquid Dominated Fields" with I.K. Smith and N. Stosic

## Research

### Research interests

- Mathematical modelling and computer simulation of thermal and fluid flow processes, including turbulence models

- Experimental methods for investigating the performance of thermal machinery and systems, especially of positive displacement compressors and boilers

- The application of analytical and experimental techniques to the design of positive displacement compressors, boilers, furnaces and pipe networks

- Industrial investigations of large scale thermal power plants

### Research students

### Suraj Abdan

**Attendance: **Apr 2017 – present, part-time

**Thesis title: **Investigation of Electrically Driven Air Screw Compressor Plant

**Role: **2nd Supervisor

**Further information: **The performance of a packaged electrically driven screw compressor depends upon a number of factors. The most important of these are the rotor and casing design, cooling and lubrication and part load control. Each of these has both a positive and a negative influence and the aim of this project is to develop a method to optimise the performance to cost ratio of the whole system, over the entire operating range by optimising all these effects simultaneously.

### Mohammad Arjaneh

**Attendance: **Jan 2013 – Apr 2015, full-time

**Thesis title: **Experimental investigation of the multiphase flow at the suction of screw compressor for validation of calculation results

**Role: **1st Supervisor

**Further information: **To determine flow characteristic at the inlet of screw compressor by means of modern measuring methods and to integrate obtained results with predicted values in the common calculation suite.

Date of start 01 Dec 2012

## Publications

### Publications by category

### Books (7)

- Smith, I.K., Stosic, N. and Kovacevic, A. (2014).
*Power Recovery from Low Grade Heat by Means of Screw Expanders.*ISBN 978-1-78242-189-4. - Stosic, N., Kovačević, A. and Smith, I.K. (2006).
*Screw Compressors: Three Dimensional Computational Fluid Dynamics and Solid Fluid Interaction Effects, Monograph.*Springer Verlag, Berlin. ISBN 3-540-36302-5. - Kovacevic, A., Stosic, N. and Smith, I.K. (2006).
*Screw Compressors: Three Dimensional Computational Fluid Dynamics and Solid Fluid Interaction Effects.*Berlin: Springer Verlag. ISBN 3-540-36302-5. - Stosic, N., Smith, I.K. and Kovačević, A. (2005).
*Screw Compressors: Mathematical Modeling and Performance Calculation, Monograph.*Springer Verlag, Berlin. ISBN 3-540-24275-9. - Stosic, N., Kovacevic, A. and Smith, I.K. (2005).
*Screw Compressors: Mathematical Modeling and Performance Calculation.*Berlin: Springer Verlag. ISBN 3-540-24275-9. - Stosic, N. (2000).
*Steam Boilers.*Mašinski fakultet Sarajevo. - Stosic, N., Demirdžić, I. and Kaludjerčić, P. (1990).
*Computers in Engineering.*Svjetlost Sarajevo.

### Chapters (7)

- Stosic, N., Smith, I.K. and Kovacevic, A. (2019).
**Screw compressors and expanders.***Positive Displacement Machines*(pp. 115–142). Elsevier. - Kovacevic, A., Rane, S. and Stosic, N. (2019).
**Modelling of twin-screw machines by use of CFD.***Positive Displacement Machines*(pp. 423–441). Elsevier. - Read, M., Stosic, N. and Smith, I. (2017).
**Operational Characteristics of Internally Geared Positive Displacement Screw Machines.**American Society of Mechanical Engineers. - Chukanova, E., Stosic, N. and Kovacevic, A. (2013).
**Numerical analysis of unsteady behaviour of a screw compressor plant system.**(pp. 129–139). ISBN 978-1-78242-169-6. - Buckney, D., Kovacevic, A. and Stosic, N. (2013).
**Experimental validation of a geometry model for twin screw machines.**(pp. 237–246). ISBN 978-1-78242-169-6. - Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E.
**Developments in Modeling Positive Displacements Compressor Machines.***Engineering the Future*SCYIO. - Mujić, E., Kovačević, A., Stošić, N. and Smith, I.K.
**Noise Control by Suppression of Gas Pulsation in Screw Compressors.***Advances in Noise Analysis, Mitigation and Control*InTech.

### Conference papers and proceedings (203)

- Stosic, N. (2020).
**On Calculation of Leakage Flow in Screw Compressor Elements.***ASME 2020 International Mechanical Engineering Congress and Exposition*16-19 November. - Stosic, N. (2019).
**Influence of Oil Volume Upon Operation and Performance of Screw Machines With High Built-In Volume Ratio.***ASME 2019 International Mechanical Engineering Congress and Exposition*11-14 November. - Nouri, J.M., Stosic, N. and Guerrato, D. (2019).
**INVESTIGATION OF TURBULENT FLOW CHARACTERISTICS WITHIN SCREW COMPRESSOR.***ECCOMAS MSF 2019 THEMATIC CONFERENCE*18-20 September, SARAJEVO, BOSNIA-HERZEGOVINA. - Kovacevic, A., Rane, S. and Stosic, N. (2019).
**Modelling of Multiphase Twin Screw Machines.** - Kovacevic, A., Rane, S. and Stosic, N. (2019).
**Computational fluid dynamics in rotary positive displacement screw machines.** - Stosic, N., Smith, I. and Kovacevic, A. (2019).
**Improving Screw Compressor Displacement and Efficiency by Increasing the Rotor Profile Depth.** - Kovacevic, A., Rane, S. and Stosic, N. (2019).
**Computational fluid dynamics in rotary positive displacement screw machines.** - Rane, S., Kovačević, A., Stošić, N. and Stupple, G. (2018).
**On Numerical Investigation of Water Injection to Screw Compressors.***ASME 2018 International Mechanical Engineering Congress and Exposition*9-15 November. - Smith, I.K., Stosic, N. and Read, (2016).
**Fundamental Investigation Of Whole-Life Power Plant Performance For Enhanced Geothermal Systems.***23rd International Compressor Engineering Conference at Purdue*11 Jul 2017 – 14 Jul 2016, West Lafayette, Indiana. - Read, M., Stosic, N. and Smith, I. (2017).
**Geometrical aspects of novel internally geared screw machine.** - Read, M.G., Smith, I.K. and Stosic, N. (2016).
**Optimisation of Power Plant Operating on Waste Heat of Gas IC Engine Driven Power Generator.***ASME 2016 International Mechanical Engineering Congress and Exposition*11-17 November. - Rane, , kovacevic, A. and stosic, N. (2016).
**CFD Analysis of Oil Flooded Twin Screw Compressors.***23rd International Compressor Engineering Conference*11-14 July, Purdue University, USA. - Stosic, N., Rane, S., Kovacevic, A. and Smith, I.K. (2016).
**Screw rotor profiles of variable lead vacuum and multiphase machines and their calculation models.** - Chukanova, E., Stosic, N. and Kovacevic, A. (2015).
**Modelling and Experimental Investigation of Compressor Plant Operation Under Unsteady Conditions.***ASME 2015 International Mechanical Engineering Congress and Exposition*13-19 November. - Read, , Smith, I.K. and Stosic, N. (2015).
**Comparison of Organic Rankine Cycle Under Varying Conditions Using Turbine and Twin-Screw Expanders.***3rd International Seminar on ORC Power Systems*12-14 October, Brussels, Belgium. - Rane, S., Stosic, N. and Dhunput, A. (2014).
**Prediction of Heat Transfer and Visualisation of Temperature Field in Screw Compressors.***ASME 2014 International Mechanical Engineering Congress and Exposition*14-20 November. - Read, M.G., Smith, I.K. and Stosic, N. (2014).
**Multi-Variable Optimisation of Wet Vapour Organic Rankine Cycles with Twin-Screw Expanders.***22nd International Compressor Engineering Conference*14-17 July, Purdue. - Rane, S., kovacevic, A., Stosic, N., Jiang, Y., Furmanczyk, M. and Lowry, S. (2014).
**Influence of approaches in CFD Solvers on Performance Prediction in Screw Compressors.***22nd International Compressor Engineering Conference*14-17 July, Purdue University USA. - Arjeneh, M., Kovacevic, , Rane, , Stosic, and Gavaises, M. (2014).
**Study of Multiphase Flow at the Suction of Screw Compressor.***22nd International Compressor Engineering Conference*14-17 July, Purdue University USA. - Kovacevic, A., Rane, S. and Stosic, N. (2014).
**Screw compressor with variable geometry rotors - analysis of designs by CFD.** - Read, M., Stosic, N. and Smith, I.K. (2014).
**Effect of air temperature variation on the performance of wet vapour organic rankine cycle systems.** - Read, M., Smith, I.K. and Stosic, N. (2013).
**Optimisation of Screw Expanders for Power Recovery From Low Grade Heat Sources.***ASME 2013 International Mechanical Engineering Congress and Exposition*15-21 November. - Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013).
**CFD grid generation and analysis of screw compressor with variable geometry rotors.** - Kethidi, M., Kovacevic, A., Stosic, N. and Rane, S. (2012).
**Modelling of turbulence in screw compressor flows.***THMT-12. Proceedings of the Seventh International Symposium On Turbulence, Heat and Mass Transfer Palermo, Italy, 24-27 September, 2012*13-19 June. - Chukanova, E., Stosic, N., Kovacevic, A. and Rane, S. (2012).
**Identification and quantification of start up process in oil flooded screw compressors.** - Stosic, N. (2011).
**Normalisation of Test Results in Air Screw Compressor Measurements as a Basis for Performance Estimation of Refrigeration And Process Gas Compressors.**11-17 November, Denver, Colorado, USA. - Stosic, N., Nietcho, J.A. and Kovacevic, A. (2011).
**The Use of a Unique Tool for Manufacturing Screw Compressor Rotors of Varying Configuration, Centre Distance and Helix Angle.***7th International Conference on Compressors and Their Systems*5-6 September, London, England. - Kethidi, M., Kovacevic, A. and Stosic, N. (2011).
**Evaluation of Various Turbulence Models in Predicting Screw Compressor Flow Processes by CFD.***7th International Conference on Compressors and Their Systems*5-6 September, London, England. - Buckney, D., Kovacevic, A. and Stosic, N. (2011).
**Consideration of Clearances in the Design of Screw Compressor Rotors.***7th International Conference on Compressors and Their Systems*5-6 September, London, England. - Stosic, N., Smith, I.K. and Kovacevic, A. (2011).
**Numerical and experimental research in heat transfer to screw compressor rotors.**13-17 March, Honolulu, Hawaii, USA. - Kovacevic, A., Stosic, N., Mujic, E., Smith, I.K. and Guerrato, D. (2011).
**Extending the role of computational fluid dynamics in screw machines.** - Smith, I.K., Stosic, N., Mujic, E. and Kovacevic, A. (2011).
**Steam as the working fluid for power recovery from exhaust gases by means of screw expanders.** - Nietcho, J.A., Stosic, N. and Kovacevic, A. (2011).
**The use of a unique tool for manufacturing screw compressor rotors of varying configuration, centre distance and helix angle.** - Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2010).
**Development of Water Lubruicated Compressor Expander for Fuel Cell Application.**12-18 November, Vancouver, British Columbia, Canada. - Kovacevic, A., Mujic, E., Smith, I.K., Stosic, N. and Kethidi, M. (2010).
**Turbulence Capture in CFD for Screw Machines.***Conference on Screw Type Machines VDI-Schraubenmachinen*October, Dortmund, Germany. - Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2010).
**Extending the Role of Computational Fluid Dynamics in Screw Machines.***20th International Compressor Engineering Conference at Purdue*July. - Stosic, N., Kovacevic, A., Smith, I.K. and Mujic, E. (2010).
**Three Decades of Modern Practice in Screw Compressors.***20th International Compressor Engineering Conference at Purdue*July. - Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2010).
**Advanced Design Environment for Screw Machines.***20th International Compressor Engineering Conference at Purdue*July. - Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2010).
**Research in Water Lubricated Screw Compressors for Fuel Cell Application.***FC Expo, Academic Forum*March, Tokyo. - Stosic, N. and Smith, I.K. (2009).
**Cost Effective Small Systems for Power Recovery from Low-Grade Heat Sources.***Symposium on Energy Engineering*23-24 October, Sarajevo. - Nouri, J.M., Guerrato D., , Stosic N., , Smith, I. and Arcoumanis, C. (2009).
**Turbulent flow measurements within a screw compressor.***6th Int. Symposium on Turbulence, Heat and Mass Transfer THMT*14-18 September, Rome, Italy. - Okezue, C., Kovacevic, A., Mujic, E., Stosic, N. and Smith, I.K. (2009).
**Overview of Methods used for the Analysis of Multiphase Flows in Positive Displacement Machines.***International Conference on Compressors and Their Systems*7-9 September, London, England. - Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2009).
**Numerical modelling of gas pulsations in a screw compressor.***International Conference on Compressors and Their Systems*7-9 September, London, England. - Delash, T., Leyderman, A.D., Stosic, N., Smith, I.K. and Kovacevic, A. (2009).
**Rotor retrofit for better screw compressor performance in refrigeration and air conditioning.***International Conference on Compressors and Their Systems*7-9 September, London, England. - Kovacevic, A., Stosic, N., Mujic, E., Smith, I.K. and Guerrato, D. (2009).
**Extending the role of computational fluid dynamics in screw machines.***International Conference on Compressors and Their Systems*7-9 September, London, England. - Stosic, N., Smith, I.K. and Kovacevic, A. (2009).
**Steam as the Working Fluid for Power Recovery from Exhaust Gases by Means of Screw Expanders.***International Conference on Compressors and Their Systems*7-9 September, London, England. - Stosic, N. (2009).
**Screw Compressor, a Strong Link in Development Chain.***2nd Congress of, Sarajevo*27-31 August, Sarajevo. - Stosic, N. and Kovacevic, A. (2009).
**Relation of Modelling and Measurement in Design of Positive Displacement Machines.***Engines and Vehicles Symposium*April, Belgrade. - Smith, I.K., Stosic, N. and Kovacevic, A. (2009).
**Steam as the working fluid for power recovery from exhaust gases by means of screw expanders.** - Kovacevic, A., Stosic, N., Mujic, E., Smith, I.K. and Guerrato, D. (2009).
**Extending the role of computational fluid dynamics in screw machines.** - Smith, I.K. and Stosic, N. (2009).
**Cost Effective Small Systems for Power Recovery from Low-Grade Heat Sources.** - Stosic, N. and Smith, I.K. (2009).
**UTILIZATION OF EXPANSION WORK IN TRANSCRITICAL CO2 HEAT PUMPS IN COMBINED HEATING AND COOLING.**31 Oct 2008 – 6 Nov 2008, Boston, Massachusetts, USA. - Stosic, N., Kovacevic, A., Smith, I.K., Mujic, E. and Guerrato, D. (2008).
**Advances in Numerical and Experimental Investigation of Screw Compressors.***International Conference on Compressor and Refrigeration*September, Xian, China. - Stosic, N., Kovacevic, A., Smith, I.K., Mujic, E. and Guerrato, D. (2008).
**Experimental Validation of CFD Calculations in Screw Compressors.***IMechE Seminar ‘Computational Fluid Dynamics, how much is enough?*September, London. - Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2008).
**Geometry of Screw Compressor Rotors and Their Tools.***International Conference on Compressor and Refrigeration*September, Xian, China. - Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2008).
**Reduction of Noise in Screw Compressors.***12th International Research/Expert Conference ‘Trends in the Development of Machinery and Associated Technology’, TMT 2008*26-30 August, Istanbul, Turkey. - Mujic, E., Kovac evic, A., Stos ic, N. and Smith, I.K. (2008).
**The influence of port shape on gas pulsations in a screw compressor discharge chamber.** - Guerrato, D., Nouri, J.M., Stosic, N. and Arcoumanis, C. (2007).
**Flow and pressure characteristics within a screw compressor.**London, England. - Guerrato, D., Nouri, J.M., Stošić, N., Arcoumanis, C. and Smith, I.K. (2007).
**Flow development in the discharge chamber of a screw compressor.** - Stosic, N., Kovacevic, A., Smith, I.K. and Mujic, E. (2007).
**An evaluation of encapsulated oil flooded screw compressor systems.**Seattle 2007. - Stos ic, N., Mujic, E., Smith, I.K. and Kovac evic, A. (2007).
**Development of a rotor profile for silent screw compressor operation.**LONDON. - Kovac evic, A., Mujic, E., Stos ic, N. and Smith, I.K. (2007).
**An integrated model for the performance calculation of screw machines.** - Nouri, J.M., Guerrato D., , Stosic N., and Arcoumanis, C., (2007).
**Axial flow and pressure characteristics within a double screw compressor.** - Stosic, N., Guerrato, D., Nouri, J.M. and Arcoumanis, C. (2007).
**Flow and Pressure Characteristics within Screw Compressor.***Third International Conference on Optical & Laser Diagnostics (ICOLAD)*London, England. - Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2007).
**The Influence of Port Shape on Gas Pulsations in a Screw Compressor Discharge Chamber.***International Conference Compressors and Their Systems*London, England. - Stosic, N., Guerrato, D., Nouri, J.M. and Arcoumanis, C. (2007).
**Flow Development through the Discharge Chamber of a Screw Compressor.***International Conference Compressors and Their Systems*London, England. - Broglia, T., Iobbi, M. and Stosic, N. (2006).
**Improving the capacity and performance of air-conditioning screw compressors.**November, Chicago. - Stosic, N., Smith, I.K., Kovacevic, A. and Mujic, E. (2006).
**Vacuum and multiphase screw pump rotor profiles and their calculation models.**September, Dortmund, Germany. - Nouri, J.M., Guerrato D., , Stosic N., and Kovacevic A., (2006).
**Cycle resolved velocity measurements within a screw compressor.***18th Int. Compressor Eng. Conf.*17-20 July, Purdue. - Stosic, N., Wang, Z., Zhang, W., Kovacevic, A., Smith, I.K. and Mujic, E. (2006).
**New Design and Rotor Retrofit to Improve Capacity and Performance of Refrigeration Screw Compressors.***18th International Compressor Engineering Conference at Purdue*July. - Stosic, N., Mujic, E., Kovacevic, A. and Smith, I.K. (2006).
**The Influence of Discharge Ports on Rotor Contact in Screw Compressors.***18th International Compressor Engineering Conference at Purdue*July. - Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2006).
**INFLUENCE OF THERMAL DILATATION UPON DESIGN OF SCREW MACHINES.**May, Dubrovnik - Croatia. - Stosic, N., Kovačević, A., Smith, I.K. and Mujic, E. (2006).
**Advanced Methods and Tools for Screw Compressor Design.**April, Ljubljana, Slovenia. - Kovacevic, A., Stosic, N. and Smith, I.K. (2006).
**Numerical simulation of combined screw compressor-expander machines for use in high pressure refrigeration systems.** - Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2006).
**Influence of thermal dilatation upon design of screw machines.** - Leibowitz, H., Smith, I.K. and Stosic, N. (2006).
**Cost effective small scale ORC systems for power recovery from low grade heat sources.** - Broglia, T., Iobbi, M. and Stosic, N. (2006).
**Improving the capacity and performance of air-conditioning screw compressors.** - Stosic, N., Smith, I.K. and Kovačević, A. (2005).
**Numerical Investigation of Heat Transfer on Screw Compressor Rotors.***Mecom 2005, VIII Argentinian Congress on Computational Mechanics*November, Buenos Aires. - Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2005).
**Clearance management in multifunctional screw machines.**September, London, England. - Stos ic, N. (2005).
**Identification of constraints in the optimal generation of screw compressor rotors by the pressure angle method.**September. - Stošić, N., Smith, I.K., Kovačević, A., Kim, J.-.U. and Park, J. (2005).
**Improving screw compressor performance.**September. - Stosic, N., Mujic, E., Smith, I.K. and Kovačević, A. (2005).
**Analysis and Measurement of Discharge Port Influence upon Screw Compressor Noise.***9th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology,TMT 2005*September, Antalya. - Stosic, N., Smith, I.K., Kovačević, A. and Wei Min, Z. (2005).
**An Investigation of Liquid Injection in Refrigeration Screw Compressors.***ICCR the 5th International Conference on Compressors and Refrigeration*July, Dalian. - Stosic, N., Smith, I.K. and Kovačević, A. (2005).
**An Improved System for Power Recovery from High Enthalpy Liquid Dominated Fields.***World Geothermal Congress*May, Antalya Turkey. - Stosic, N., Smith, I.K. and Kovačević, A. (2005).
**Tool Wear and Its Compensation in Screw Rotor Manufacturing.***ACAM 2005, Australasian Congress on Applied Mechanics*16-18 February, Melbourne, Victoria, Australia. - Alagic, S., Stosic, N., Kovacevic, A. and Buljubasic, I. (2005).
**A Numerical analysis of heat transfer and fluid flow in rotary regenerative air pre-heaters.** - Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2005).
**Design Integration for Screw Compressors.**Bihac, Bosnia and Herzegovina 2005. - Kovacevic, A., Stosic, N., Mujic, E. and Smith, I.K. (2005).
**Analysis of clearances in combined screw machines.** - Mujic, E., Kovacevic, A., Stosic, N. and Smith, I.K. (2005).
**Noise prediction in screw compressors.** - Stosic, N., Smith, I.K. and Kovacevic, A. (2004).
**Estimation and control of heat transfer in screw compressor rotors.**November, Los Angeles. - Stosic, N., Smith, I.K. and Kovačević, A. (2004).
**Numerical Simulation of Combined Compressor Expander Machines for Use in High Pressure Refrigeration Systems.**September, Technical University of Copenhagen. - Smith, I.K., Stosic, N. and Kovacevic, A. (2004).
**An improved system for power recovery from higher enthalpy liquid dominated flows.***GRC Annual Meeting*August, Indian Wells, California. - Stosic, N., Smith, I.K. and Kovačević, A. (2004).
**Extension of Operating Range of Dry Screw Compressors by Cooling of Their Rotors.***17th International Compressor Engineering Conference at Purdue*July. - Stosic, N., Smith, I.K. and Kovačević, A. (2004).
**Identification of Heat Transfer on Screw Compressor Rotors as Tool for Their Design.***HEFAT 2004, 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics*21-24 June, Cape Town, South Africa. - Stosic, N., Alagic, A., Kovacevic, A. and Buljubasic, I. (2004).
**A Numerical Analysis of Heat Transfer and Fluid Flow in Rotary Regenerative Air Pre-Heaters,.***ASME - ZSITS International Thermal Science Seminar*June, Bled, Slovenia. - Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2004).
**Development of the management interface for screw compressor design tools.**14 April, Lausanne , Switzerland. - Kovacevic, A., Stosic, N., Smith, I.K. and Mujic, E. (2004).
**Fluid-solid interaction in the design of multifunctional screw machines.** - Stosic, N., Smith, I.K. and Kovačević, A. (2003).
**Fluid-Solid Interaction for Extension of Range in Screw Machine Application.***Advances of CFD in Fluid Machinery Design, ImechE Seminar*18 November, London. - Stosic, N., Smith, I.K. and Kovačević, A. (2003).
**Combined Compressor-Expander in Fuel Cell Application.***COBEM 2003, 17th International Congress of Mechanical Engineers*10-14 November, Sao Paulo. - Stosic, N., Smith, I.K. and Kovačević, A. (2005).
**Multifunctional Screw Compressor Rotors.***ICCR the 4th International Conference on Compressors and Refrigeration, Xi*21 Oct 2003 – 25 Oct 2005. - Stosic, N., Smith, I.K. and Kovacevic, A. (2003).
**Improving refrigeration screw compressor performance with optimized rotors.**8-10 September, London, England. - Kovacevic, A., Stosic, N. and Smith, I.K. (2003).
**The application of CFD analysis to the design of bi-functional screw machines.**8-10 September, London, England. - Stosic, N., Kovačević, A., Smith, I.K. and Mujić, E. (2003).
**Advanced Design Tools for Screw Compressors.***2nd DAAAM International Conference on Advanced Technologies for Developing Countries,ATDC03*25-28 June, Tuzla, Bosnia and Herzegovina. - Stosic, N., Smith, I.K., Kovacevic, A., PEP, and PEP, (2003).
**Combined screw compressor-expander in fuel cell application.** - Kovacevic, A., Stosic, N. and Smith, I.K. (2002).
**Numerical simulation of fluid flow and solid structure in screw compressors.**17-22 November, New Orleans. - Stosic, N., Smith, I.K. and Kovačević, A. (2002).
**Optimization of Screw Compressor Design.***VIII European Congress on Fluid Machinery for the Oil, Gas and Petrochemical Industry*October. - Stosic, N., Smith, I.K. and Kovačević, A. (2002).
**Screw Compressor: A Strong Link in the Development Chain.***International Conference on Advanced Technologies for Developing Countries*12-14 September, Slavonski Brod, Croatia. - Kovacevic, A., Stosic, N. and Smith, I. (2002).
**The influence of rotor deflection upon screw compressor performance.**September, Dortmund. - Stosic, N., Alagic S, and Kovacevic A, (2002).
**A Numerical Analysis of the Fluid Flow and Heat Transfer in Ljungsroem Air Preheater.***TMT 2002, Neum, B&H*September. - Stosic, N., Smith, I.K. and Kovacevic, A. (2003).
**Optimization of screw compressor design.**Jul 2002, Purdue. - Kovacevic, A., Stosic, N. and Smith, I.K. (2002).
**Three-dimensional modelling of solid fluid interaction as a design tool in screw compressors.**14-17 May, Dubrovnik. - Kovacevic, A., Stosic, N. and Smith, I.K. (2002).
**Numerical simulation of fluid flow and solid structure in screw compressors.** - Stosic, N., Smith, I.K. and Kovačević, A. (2002).
**A Twin Screw Combined Compressor and Expander for CO2 Refrigeration Systems.***XVI International Compressor Engineering Conference at Purdue*JUL 2002. - Stosic, N., Smith, I.K. and Kovačević, A. (2002).
**Solid-Fluid Interaction in Screw Compressors.***XVI International Compressor Engineering Conference at Purdue*JUL 2002. - Smith, I.K., Stosic, N. and Kovacevic, A. (2002).
**Optimization of Screw Compressor Design.**USA. - Stosic, N., Kovačević, A. and Smith, I.K. (2001).
**The design of efficient Screw Air Compressors.***3rd Symposium 'Revitalization and Modernization of Metal Industry in B&H*October, Bihać, Bosnia and Herzegovina. - Smith, I.K., Stosic, N. and Kovacevic, A. (2001).
**A feasibility study of throttle loss power recovery in large heat pumps with two stage compression.**September, London, England. - McCreath, P., Stosic, N., Smith, I.K. and Kovacevic, A. (2001).
**The design of efficient screw compressors for delivery of dry air.**September, London, England. - Stosic, N. and Smith, I.K. (2001).
**Prospects for Energy Conversion Efficiency Improvements by the Use of Two-Phase Expanders.***2nd International Heat Powered Cycles Conference*September, Paris. - Stosic, N., Kovačević, A. and Smith, I.K. (2001).
**Rotor Interference as a Criterion in a Screw Compressors Design.***ICTC, International Compressor Technique Conference*August, Wuxi, China. - Stosic, N., Kovačević, A. and Smith, I.K. (2001).
**Power Recovery From Low Cost Two-Phase Expanders.***Geothermal Research Council 2001 Annual Meeting*August, San Diego, CA. - Stosic, N., Kovačević, A. and Smith, I.K. (2001).
**CFD Analysis of a Screw Compressor Performance.***IMechE Symposium “Advances of CFD in Fluid Machinery Design”*June. - Kovacevic, A., Stosic, N., Smith, I.K., IMECHE, and IMECHE, (2001).
**Analysis of screw compressor performance by means of three-dimensional numerical modelling.** - Madhav, K.V., Stosic, N., Smith, I.K., Kovacevic, A., IMECHE, and IMECHE, (2001).
**The design of a family of screw compressors for oil-flooded operation.** - Stosic, N., Kovačević, A., Smith, I.K. and Venumadhav, K. (2001).
**Retrofit of 'N' Rotors for Efficient oil-Flooded Screw Compressors.***2000 International Compressor Engineering Confereence at Purdue, Lafayette, IN, USA, July 2000, also ICTC, International Compressor Technique Conference, Wuxi, China, August 2001*. - Kovacevic, A., Stosic, N. and Smith, I.K. (2000).
**Grid aspects of screw compressor flow calculations.**November, Orlando, FL. - Stosic, N., Brasz, J.J. and Smith, I.K. (2000).
**Development of a Twin Screw Expressor as a Throttle Valve Replacement for Water-Cooled Chillers.***2000 International Compressor Engineering Confereence at Purdue*July, Lafayette, IN, USA. - Stosic, N., Kovaćević, A. and Smith, I.K. (2000).
**The CFD Analysis of a Screw Compressor Suction Flow.***2000 International Compressor Engineering Confereence at Purdue*July, Lafayette, IN, USA. - Stosic, N., Smith, I.K. and Kovačević, A. (2000).
**Twin Screw Machines to replace Throttle Valve in Refrigeration Systems,.***ASME - ZSITS International Thermal Science Seminar*June, Bled, Slovenia. - Stosic, N., Smith, I.K. and Kovacevic, A. (2000).
**Design of oil-less helical twin screw machines.**May, Dubrovnik, Croatia. - Stosic, N. and Kovačević, A. (1999).
**CAD-CFD Interface for Screw Compressor Analysis.***2nd Symposium ‘Revitalization and Modernization of Metal Industry in B&H*October, Bihać, Bosnia and Herzegovina’. - Stosic, N. (1999).
**Recent developments in screw compressors.**September, London, England. - Smith, I.K., Stosic, N., Aldis, C.A. and Kovacevic, A. (1999).
**Twin screw two-phase expanders in large chiller units.**September, London, England. - Kovacevic, A., Stosic, N. and Smith, I.K. (1999).
**Development of CAD-CFD interface for screw compressor design.**September, London, England. - Stosic, N. and Smith, I.K. (1999).
**Rewiev of the Development of Two-Phase Screw Expanders.**September, London, England. - Karagiorgis, G., Stosic, N. and Smith, I.K. (1999).
**Scroll compressor flow modelling - a computational investigation.** - Stosic, N., Kovacevic, A. and Smith, I.K. (1998).
**Modelling of screw compressor capacity control.**November, London, England. - Stosic, N. (1998).
**Screw Compressors: Future Developments.***Int. Conference ‘Advancement in Mechanical Engineering’*October, Sarajevo, Bosnia and Herzegovina. - Stos ic, N., Smith, I.K., Brasz, J.J. and Sishtla, V. (1998).
**The performance of a screw compressor with involute contact rotors in a low viscosity gas-liquid mixture environment.***'Scraubenmaschinen 98', VDI Berichte 1391*September, Dortmund, Germany. - Stosic, N., Kovačević, A. and Smith, I.K. (1998).
**Modelling of Screw Compressor Capacity Control.***1998 International Compressor Engineering Confereence at Purdue*July, Lafayette, IN, USA. - Stosic, N., Smith, I.K. and Kovacevic, A. (1998).
**Some aspects of tool design for screw compressor rotor manufacturing.**May, Dubrovnik, Croatia. - Stosic, N. and Kovačević, A. (1997).
**Modelling of the Influence of Capacity Control on the Working Process of a Refrigeration Screw Compressor.***Second International Compressor Technique Conference"*August, Chengdu, China. - Stosic, N. and Kovačević, A. (1997).
**A Study of Variable Capacity Operation of Screw Compressors.***1st Symposium 'Revitalization and Modernization of Metal Industry in B&H*July, Bihać, Bosnia and Herzegovina. - Stosic, N. and Hanjalić, K. (1996).
**A General Method for for Screw Compressor Profile Generation.***XIII Int. Conf on Compressor Engineering*July, Purdue. - Stosic, N., Smith, I.K. and Zagorac, S. (1996).
**CFD Studies of Flow in Screw and Scroll Compressors.***XIII Int. Conf on Compressor Engineering*July, Purdue. - Stosic, N. and Smith, I.K. (1995).
**The Expressor: An Efficiency Boost to Vapour Compression Systems by Power Recovery from the Throttling Process.***ASME Congress*November, San Francisco. - Stosic, N., Hanjalić, K. and Kovačević, A. (1995).
**Screw Compressor Rotor Profile Optimization.***Symposium:Mechanical Engineering and Design*October, Zenica, Bosnia Herzegovina. - Stosic, N., Smith, I.K. and Aldis, C. (1995).
**The Trilateral Flash Cycle System A High Efficiency Power Plant for Liquid Resources.***World Geothermal Conference*May, Florance Italy. - Stosic, N. and Hanjalić, K. (1994).
**Application of Mathematical Modelling of Screw Engines to the Optimization of Lobe Profiles.***Schraubenmaschinen, VDI Bereichte 1135*October, Dortmund. - Stosic, N. and Hanjalić, K. (1994).
**The Development and Optimization of Screw Engine Rotor Pairs on the Basis of Computer Modelling.***XII Int. Conf on Compressor Engineering at Purdue*July. - Stosic, N. and Smith, I.K. (1994).
**Lysholm Machines as Two-Phase Expanders.***XII Int. Conf on Compressor Engineering*July, Purdue. - Stosic, N. and Schaefer, M. (1994).
**Parallel Multigrid CFD Calculations of Turbulent Flow in Complex Geometries.***World CFD User Conference*May, Basle, Switzerland. - Stosic, N. and Hanjalić, K. (1992).
**Multi Purpose Simulation of Processes in Positive Displacement Compressors.**March, Erlangen, Germany. - STOSIC, N., MILUTINOVIC, L., HANJALIC, K. and KOVACEVIC, A. (1990).
**EXPERIMENTAL INVESTIGATION OF THE INFLUENCE OF OIL INJECTION UPON THE SCREW COMPRESSOR WORKING PROCESS.**West Lafayette, IND, USA. - Stosic, N., Milutinović, L.J. and Kovačević, A. (1990).
**An Experimental Investigation of the Influence of Oil on Screw Compressor Processes.***JUREMA Symposium*Zagreb. - Stosic, N., Milutinović, L.J. and Koprivica, J. (1990).
**Oil Droplet Dynamics in Screw Compressor Lobes.***19th Yugoslav Congress on Theor Appl Mech*Ohrid. - Stosic, N., Kovačević, A., Milutinović, L.J. and Favaro, M. (1990).
**The Construction, Production and Manufacturing Control of Two-Stage Screw Compressors.***19th Symposium on Informatics*Jahorina. - Stosic, N. and Božić, O. (1990).
**Combustion in a Boiling Fluidized Bed: A Mathematical Model.***18th Yugoslav Symposium on Thermal Engineering*Neum. - Stosic, N., Božić, O. and Numić, A. (1990).
**Combustion in a Boiling Fluidized Bed: A project of reconstruction of a 105 t/h Steam Boiler.***18th Yugoslav Symposium on Thermal Engineering*Neum. - Stosic, N. and Hanjalić, K. (1989).
**Development and Optimization of a New Family of Screw Compressors by Computer Modelling.**Sarajevo. - Stosic, N., Hanjalić, K., Koprivica, J., Marijanović, Z. and Kovačević, A. (1989).
**Analysis of Refrigerating Screw Compressors by Mathematical Modelling.**Sarajevo. - Stosic, N. and Kaludjerčić, P. (1989).
**Optimization of Sanitary Water Preparation.**Sarajevo. - Stosic, N., Hanjalić, K., Kovačević, A. and Milutinović, L.J. (1988).
**Mathematical Modelling of the Influence of Oil on the Working Cycle of Screw Compressors.**July, West Lafayette,IND, USA. - Stosic, N. and Kovačević, A. (1988).
**The Measurement and Acquisition of Screw Compressor Data.***JUREMA Symposium*Zagreb. - Stosic, N. and Hanjalić, K. (1988).
**The Calculation of Periodic Turbulent Flows of Large Amplitude.***18th Jugoslav Congress on Theor Appl Mech*Vrnjačka Banja. - Stosic, N., Kaludjerčić, P. and Demirdžić, I. (1986).
**The Application of Personal Computers to the Dynamic Analysis and Control of Main Gas Pipelines.***6th BiH Symposium on Informatics*Jahorina. - Stosic, N., Kaludjerćić, P. and Demirdćić, I. (1986).
**An Approach to the Solution of Numerically Unsteady Compressible Flow.***Symposium on Contemporary Problems in Nonlinear Mechanics*Vrnjačka Banja. - Stosic, N., Kaludjerčić, P. and Demirdžić, I. (1986).
**The Development of an Implicit Method of Finite Differences to Solve Unsteady Compressible Flow Phenomena and Its Application to the Dynamic Balance of Gas Networks.***17th Yugoslav Congress on Theor Appl Mech*Zadar. - Stosic, N. (1986).
**The Optimal Control of Thermal Plant with Many Boiler Units.***17th KGH Congress*Belgrade. - Stosic, N., Smailhodžic, H. and Bešlagić, S. (1986).
**Analysis of the Processes of a Rotational Klinker Kiln Burning Coke Oven Gas.***Symposium Jucema*Rogaška Slatina. - Stosic, N., Hanjalić, K., Ivanović, M., Lovren, N. and Koprivica, J. (1986).
**CAD of Screw Compressor Rotors.***PRPR Symposium*Zagreb. - Stosic, N. (1985).
**The Application of Personal Computers in the CAD of Screw Compressors.***Symposium on Actual Problems of Mechanical Elements and Constructions*Ohrid. - Stosic, N., Demirdžić, I. and Ivanović, M. (1985).
**The Numerical Prediction of Ventilated Rooms in Industrial and Commercial Buildings.***Symposium on New Construction and Design Concepts for Ventilation and Air Conditioning*Karlovy Vary. - Stosic, N. (1985).
**Modelling of Furnace processes by means of a Microcomputer.***International 85 AMSE Conference on Modelling and Simulation*Monastir, Tunis. - Stosic, N. and Hanjalić, K. (1984).
**The Determination of Frequency Characteristics of Pulsating Turbulent Flow by Mathematical Modelling.***16th Yugoslav Congress of Theor Appl Mech*Bečići. - Stosic, N. and Hanjalić, K. (1984).
**The Influence of Turbulence Intensity on Diffuser Flows.***16th Yugoslav Congress of Theor Appl Mech*Bečići. - Stosic, N., Lovren, N. and Koprivica, J. (1984).
**Tool Profiling for Screw Element Milling by Means of an Analytical-Numerical Procedure.***16th Yugoslav Congress of Theor Appl Mech*Bečići. - Hanjalic, K. and Stosic, N. (1983).
**HYSTERESIS OF TURBULENT STRESSES IN WALL FLOWS SUBJECTED TO PERIODIC DISTURBANCES.***Symposium on Turbulent Shear Flows*Karlsruhe, BRD. - Stosic, N., Mirković, Z. and Martinović, D. (1982).
**Measuring the Heat Transfer Coefficient of Windows.***13th KGH Seminar*November, Belgrade. - Stosic, N. and Hanjalic, K. (1982).
**NUMERICAL STUDY OF UNSTEADY CONVECTIVE HEAT TRANSFER IN PULSATING DUCT FLOWS.**Muenchen, DBR. - Stosic, N. and Lalović, M. (1982).
**Computer Processing of Measurements taken in Boiler Investigations.***6th Yugoslav Symposium on Informatics*Jahorina. - Stosic, N., Hanjalić, K. and et al., (1981).
**Summary of Computations Carried out at Masinski fakultet Sarajevo.**Stanford. - Stosic, N., Demirdžić, I., Durić, Z., Kaludjerčić, P. and Perić, M. (1981).
**The Analysis and Design of Gas-Networks by Means of a Computer.***5th BiH Symposium on Informatics*Jahorina. - Stosic, N., Hanjalić, K. and Vučetić, D. (1981).
**The Modelling of Positive Displacement Compressor Processes.***6th Yugoslav Symposium of Thermal Engineers*Bled. - Stosic, N., Vučetić, D. and Hanjalić, K. (1981).
**An Alternative Approach To the Solution of Compressible Flow in Thermal Engines.***15th Yugoslav Congress of Theor Appl Mech*Kupari. - Stosic, N. and Hanjalić, K. (1981).
**The Numerical Solution of Unsteady Convective Heat Transfer Through Resonant Gas Flow in Pipes.***15th Yugoslav Congress of Theor Appl Mech*Kupari. - Stosic, N. (1980).
**The Treatment of Boundary Values in Solving Hyperbolic Equations of One Dimensional Flow.***Symposium on Contemporary Problems in Nonlinear Mechanics*Tara. - Stosic, N. (1980).
**The Analysis of an Accumulative Gas-Turbine Plant.***Symposium on Rational Production and Use of Energy*Sarajevo. - Stosic, N., Demirdžić, I. and Kaludjerčić, P. (1980).
**Gas-Network Calculations.***11th KGH Seminar*Beograd. - Stosic, N. and Hanjalic, K. (1978).
**Computer simulation of two-stage reciprocating compressors.**July, Purdue Univ, West Lafayette, IND, USA. - Hanjalic, K. and Stosic, N. (1978).
**Some aspects of laboratory testing of two-stage reciprocating compressors.**July, Purdue Univ, West Lafayette, IND, USA. - Stosic, N. (1978).
**The Application of Finite Difference Methods to Solve One Dimensional Unsteady Nonisentropic Flow.***14th Yugoslav Congress of Theor Appl Mech*Portorose. - Stosic, N. and Hanjalić, K. (1978).
**Some Aspects of Laboratory Testing and Computer Modelling of Two-Stage Compressors with Inter and After-Cooling.**Glasgow. - Stosic, N. (1976).
**A Contribution Towards the Numerical Solution of Unsteady Nonisentropic Flow by the Method of Characteristics.***12th Yugoslav Congress of Theor Appl Mech*Sarajevo. - Stosic, N. and Hanjalić, K. (1976).
**The Application of Numerical Methods to Solve Pressure Wave Propagation in Unsteady Nonhomentropic Gas Flow in Simple Pipes.***12th Yugoslav Congress of Theor Appl Mech*Sarajevo. - Stosic, N., Hanjalić, K. and Pejović, K. (1975).
**The Measurement of High Frequency Oscillatory Pressures.***JUREMA Symposium*Zagreb. - Stosic, N. and Hanjalić, K. (1975).
**The Application of Microthermocouples to Instant Temperature Measurements.***JUREMA Symposium*Zagreb. - Abdan, S., Stosic, N., Kovacevic, A., Smith, I. and Deore, P.
**Identification and analysis of screw compressor mechanical losses.** - Basha, N., Kovacevic, A., Stosic, N. and Smith, I.
**Effect of oil-injection on twin screw compressor performance.** - Abdan, S., Stosic, N., Kovacevic, A., Smith, I. and Asati, N.
**Analysis of rolling bearing power loss models for twin screw oil injected compressor.** - Stosic, N.
**Operation and performance of screw machines with high built-in volume ratio.** - Read, M.G., Smith, I.K. and Stosic, N.
**Geometrical Comparison of Conventional and Gerotor-Type Positive Displacement Screw Machines.** - Abdan, S., Basha, N., Kovacevic, A., Stosic, N., Birari, A. and Asati, N.
**Development and Design of Energy Efficient Oil-Flooded Screw Compressors.**

### Journal articles (92)

### Patents (6)

- REad, M.G., Stosic, N.R. and Smith, I.K. (2015).
**Internal Gear Expander.** - Smith, I.K. and Stosic, N.R. (2012).
**Extended Wet Steam Proposal GB1211242.1 25th June 2012 (Pending).** - Smith, I.K. and Stosic, N.R. (2008).
**7. Generating Power from Medium Temperature Heat Sources GB0802315.2 7th February 2008 (Pending, Foreign applications Granted ).** - Stosic, N.
**Plural Screw Positive Displacement Machines.**Patent no. EP 898655, US 6,296,461 - Stosic, N.
**Deriving Mechanical Power by Expanding a Liquid to Its Vapour.**Patent no. GB 9602191, EP 787891, US 5,833,446 - Stosic, N.
**Plural-Screw Machines.**

### Thesis/dissertation

- Rane,
**Grid Generation and CFD Analysis of Variable Geometry Screw Machines.**(PhD Thesis)